BEHRINGER K-2 MK II PATCH BOOK – 500 ORIGINAL PATCHES
By TSL Studio | 540-Page Digital PDF | Made in Greece
EXPLORE THE FULL SOUND POTENTIAL OF YOUR BEHRINGER K-2 MK II!
Take your sound design further with the K-2 MK II Patch Book by TSL Studio, a comprehensive 540-page digital reference featuring 500 original patches created specifically for the Behringer K-2 MK II analog semi-modular synthesizer.
From deep analog basses and powerful sync leads to metallic ring-modulation sounds, expressive pads, synthetic percussion, random sequences, external audio processing and experimental patchbay techniques, this collection explores a wide range of sounds that can be created with the K-2 MK II.
This is more than a list of suggested knob positions. Each patch is presented through a detailed panel diagram, documented control settings, switch configurations, sound descriptions and three practical playing tips. For patches using the patchbay, the required cable connections are also shown.
Whether you are looking for inspiring sounds for your next production or want to understand the K-2 MK II more deeply, this book gives you a structured starting point for both sound creation and experimentation.
500 PATCHES ACROSS 14 CATEGORIES
The book is organized into 14 chapters, making it easy to browse by sound type.
1. Bass & Sub (001–040) – 40 patches
Deep basses, sub sounds, sync basses, FM plucks, pulse-width growls, octave stacks, pitch drops and vowel-like filter sounds.
2. Leads (041–080) – 40 patches
Expressive synthesizer leads, hard-sync voices, FM-inspired tones, gliding leads, vibrato and cutting solo sounds.
3. Ring Mod & Metallics (081–120) – 40 patches
Metallic timbres, inharmonic tones, bell-like sounds, gongs and experimental ring-modulated textures.
4. Sync & FM Voices (121–155) – 35 patches
Harmonic complexity, aggressive sync sweeps, FM tones and evolving oscillator interactions.
5. Pads & Ensembles (156–190) – 35 patches
Sustained analog textures, atmospheric layers, ensemble-style sounds and evolving tones.
6. Brass, Reeds & Winds (191–220) – 30 patches
Bold brass-style sounds, reedy tones, synthesized winds and expressive instrumental textures.
7. Keys, Plucks & Mallets (221–255) – 35 patches
Percussive keyboard sounds, plucks, mallet-style tones and articulate melodic patches.
8. Drums & Percussion (256–295) – 40 patches
Electronic percussion, synthetic hits, tuned impacts and experimental drum sounds.
9. Sci-Fi & Sound FX (296–340) – 45 patches
Futuristic effects, dramatic sweeps, unusual textures, transitions and experimental sound design.
10. Noise & Textures (341–370) – 30 patches
Noise-based sounds, textured layers and unconventional analog tones.
11. S&H, Clock & Random (371–405) – 35 patches
Sample-and-hold modulation, random stepped movement, clock-driven effects and evolving sequences.
12. External Input Lab (406–435) – 30 patches
Explore the K-2 MK II’s External Signal Processor (ESP) for working with external audio, including material from instruments such as guitars, microphones and drum machines.
13. Patch Bay Modulation Lab (436–470) – 35 patches
Creative modulation routing, envelope manipulation, alternative control signals and semi-modular sound-design techniques.
14. Drones & Soundscapes (471–500) – 30 patches
Sustained drones, evolving soundscapes, atmospheric textures and experimental sonic environments.
265 PATCHES USING THE PATCH BAY
One of the most valuable features of this collection is its dedicated exploration of the K-2 MK II’s patchbay.
265 of the 500 patches use patch cables, allowing you to explore modulation and routing possibilities beyond the synthesizer’s internal connections.
The book documents the required cable connections and includes a dedicated Patch Bay Modulation Lab, as well as reference material explaining how the connections work.
Discover creative techniques involving:
- LFO and modulation routing.
- Envelope-controlled pitch and filter movement.
- Hard sync, frequency modulation and ring modulation.
- Sample-and-hold and random modulation.
- Clock and trigger connections.
- External audio processing through the ESP.
- Patchbay VCA techniques and experimental feedback.
- Alternative signal paths for unusual sounds.
The book also explains which normal internal connections are replaced when a patch cable is inserted into specific inputs, helping you understand the routing rather than simply copying it.
DETAILED SETTINGS FOR EVERY PATCH
Each patch page is designed to make sound recreation clear and practical.
Every patch includes:
- A detailed synthesizer panel diagram with coloured pointers showing the intended knob positions.
- Numerical values for the controls, using a 0–10 scale where applicable.
- Documented oscillator waveforms and scale settings.
- Switch positions for oscillator sync, FM and filter selection.
- Oscillator tuning guidance, including relative pitch settings.
- Patchbay cable diagrams and connection instructions wherever required.
- Waveform illustrations, envelope diagrams and filter-response drawings.
- A description explaining how the sound is produced and what it sounds like.
- Three playing tips for exploring and adjusting the patch.
- A dedicated notes area for your own modifications.
The two centre-zero controls, VCO 2 PITCH and MASTER TUNE, are documented using relative values from -5 to +5. Since analog oscillator tuning and other responses can vary between units, the book also explains how to use the settings as starting points and fine-tune by ear.
A PRACTICAL SOUND-DESIGN REFERENCE
In addition to the 500 patches, this book contains reference chapters designed to help you understand and program the K-2 MK II.
A Plain Starting Patch
Begin with a basic, unmodulated sound and use it as a foundation for creating your own patches.
Know Your K-2 MK II
An overview of the oscillators, VCO mixer, high-pass and low-pass filters, modulation generator, envelope generators, VCA, patchbay and External Signal Processor.
How to Read a Patch Page
Understand the control diagrams, knob values, switch indications, patch cables and sound illustrations.
The Signal Path
Learn how the internal audio and modulation paths work, and how patch cables change the normal routing.
Sync, FM & Ring Modulation
Explore three important techniques for creating more complex tones with the two oscillators.
Setup & MIDI Notes
Practical guidance on connecting the synthesizer to MIDI equipment, tuning, audio connections and using the External Signal Processor.
Quick Tweaking Guide
Learn how to make sounds brighter or darker, adjust resonance, change note lengths, add movement and explore randomness.
Patch Bay Guide
A reference to the patchbay inputs, outputs, modulation sources, triggers, control voltages and external signal connections.
Cable Cookbook
Practical patching examples for filter movement, random notes, reverse envelopes, automatic triggers and external audio processing.
A–Z Patch Index
Find sounds more quickly using the alphabetical index.
Blank Custom Patch Pages
Dedicated templates for writing down and saving your own settings, cable connections and sound-design experiments.
DESIGNED FOR MUSICIANS & SOUND DESIGNERS
Whether you produce electronic music, record in a home studio, perform live or simply enjoy exploring analog synthesis, the K-2 MK II Patch Book offers an extensive collection of sounds and techniques to inspire your workflow.
Use the patches as starting points, experiment with the controls, adjust the modulation and develop your own variations.
All 500 patch names, descriptions and playing tips were created for this book. You are free to use the sounds you create from these patches in your own music.
PRODUCT DETAILS
Product: Behringer K-2 MK II Patch Book
Creator: TSL Studio
Collection: 500 original patches
Organization: 14 sound categories
Patchbay content: 265 patches using patch cables
Length: 540 PDF pages
Format: Digital PDF book
Designed in: Greece
IMPORTANT – DIGITAL PDF ONLY
This listing is for the digital PDF book only.
No physical book, synthesizer, patch cables, hardware, audio samples or installable preset files are included.
This is a patch reference and sound-design guide. You recreate the sounds manually by following the documented settings and instructions on your compatible Behringer K-2 MK II synthesizer.
The PDF is delivered digitally after payment.
Please note that the settings are intended as starting points and have not been verified on every individual synthesizer unit. Analog tuning, filter response and envelope timing may vary.
UNOFFICIAL INDEPENDENT PUBLICATION
The K-2 MK II Patch Book is an independent publication. It is not affiliated with, authorized by or endorsed by Behringer or Music Tribe. Behringer and K-2 MK II are trademarks of their respective owners and are used only to identify the synthesizer for which this book was created.
The PDF is protected by copyright. Copying, sharing or redistributing the publication in print or digital form requires the publisher’s written permission.
Designed by TSL Studio. Made in Greece.
Thank you for supporting independent sound design and TSL Studio!
Reviews
There are no reviews yet.